Provisioning - Cisco SPA 112

Step 1 Find the ATAs current IP Address

-Connect the ATA to the network using the Internet port on the side of the unit 

-Connect power to the ATA

-Attach an analog phone to the Phone 1 port 

-Pick up the handset and dial ****110#

-The IP Address will be read to you; write this number down

Step 2 Configure the ATA to point to Key2ip's provisioning server

-Connect a computer to the same network as the ATA

-Open a web browser and enter the ATA's IP Address in the address bar (ex: http://192.168.1.101/admin/advanced/)

-Click on the provisioning tab

-Scroll to the Profile Rule and set using the following: 

http://laxxsp1.masteraccess.com/dms/spa112/$MA.xml

-Scroll to the bottom of the page and Submit All Changes

What to expect after saving settings: 

-After saving the settings, the ATA will reboot 1 time 

-If the ATA Phone 1 (and Phone 2) LED indicators do not turn green, open your web browser again and go to http://xx.xx.xx.xx/admin/resync (replace xx.xx.xx.xx with the ATA’s current IP address)

-The phone will reboot and download the latest copy of its configuration from the Key2ip provisioning server.